EV Charger Installation Adelaide

Home, strata and workplace EV charger installation across Adelaide. We are an Evnex certified installer partner, licensed electrical contractor PGE 259431, rated 5.0 from 216 Google reviews. Most homes: $1,600–$2,800 supplied and installed.

20+ Years Of Electrical Excellence

Certified EV Charger Installers In Adelaide

Bice Electrical installs EV chargers on a dedicated circuit, with switchboard work, load management and the electrical Certificate of Compliance included. Most Adelaide homes pay $1,600–$2,800 for a 7.4kW single-phase charger supplied and installed; three-phase 22kW units run $2,800–$4,500.

We’re an Evnex certified installer partner and also fit Tesla Wall Connector, Zappi, Ocular, Fronius Wattpilot and Wallbox, for houses, strata car parks and workplaces. If your switchboard needs upgrading first, we do it in the same visit. Based in Unley, licensed PGE 259431.

We can help with:

EV charger installation for homes and businesses
Advice on the best charger type for your vehicle
Safe and compliant installation by licensed electricians
Integration with existing power systems

What To Expect During Your EV Charger Installation In Adelaide

Most Adelaide home installs are finished in a single visit of: 3 to 6 hours, and this is the order the work happens in.

Step 1: Assessment

A Bice Electrical electrician checks your switchboard capacity, confirms whether you have single or three phase supply, & measures the cable run from the switchboard to where the car parks. That distance & the state of the board set the price, so you get a fixed, itemised quote.

Step 3: Wiring And Mounting

Cable is run from the switchboard to the charger through the roof space, wall cavity or in conduit, kept off the floor and away from anything it could be damaged by. The charger is mounted on the garage, carport or exterior wall, or on a pedestal where there is no wall to use.

Step 2: Switchboard Work

We fit a dedicated circuit breaker with RCD protection, usually a single RCBO, in your switchboard for the charger alone. If the board is full, still has ceramic fuses or has no safety switch, we upgrade it in the same visit rather than sending you away to organise it separately.

Step 4: Testing And Handover

Every installation is tested before it is powered up, then we lodge the electrical Certificate of Compliance with the Office of the Technical Regulator. Before we leave we connect the charger to your Wi-Fi or 4G, set up the app, and plug your car in so you can see it charging.

Two Things To Check Before You Request A Quote

Two details set most of the price, and you can check both before you call.

Single phase or three phase power? Open your meter box. One main switch means single phase and a 7.4kW charger. A main switch three poles wide, or three service fuses, means three phase and the option of 11kW or 22kW. A photo of the board is all we need to confirm it.

How far is the parking spot from the switchboard, and is it indoors or outdoors? A charger on the garage wall nearest the board is the shortest run and the lowest price. A car parked on the far side of the house, outdoors, or on a driveway needs a longer run and a weatherproof mount, which we price at the assessment.

Plus, if you know it: the make and model of your EV, so we can match the charger to what the car will actually accept.

Our Recently Completed EV Charger Installation Projects In Adelaide, SA

Evnex EV Charger Installation at Lockleys, SA

View project

evnex ev charger installed brick wall adelaide

Evnex EV Charger Installation In Westbourne Park

View project

EV Charger Brands We Install

We’re a certified Evnex installer, and we install and commission every other major charger sold in Australia.

Bought a charger with your car? Every EV sold in Australia charges through a Type 2 connector, so we can install any AS/NZS-compliant unit, including the wallbox supplied with your Tesla, BYD, Kia, Polestar, BMW or MG. Bring us the box and we’ll take care of the rest.

The Evnex Electric Vehicle Charger Range We Install

Bice Electrical is a certified Evnex installer, so we supply, install and commission the full Evnex range across Adelaide. Your four-year residential warranty stays intact.

Single Phase

Evnex E2 Core7.4kW · 5m tethered cable · adds up to 50km of range per hour. The pick for most Adelaide homes.

Single Phase · 4G

Evnex E2 Plus7.4kW · 8m cable · built-in 4G. For cars that park further from the switchboard, or garages with weak Wi-Fi.

Three Phase

Evnex X22 22kW · adds up to 120km of range per hour. For properties with three-phase supply, and for commercial sites.

What Our Local Adelaide Clients Are Saying...

What the local community says about our electrical services.

I went with Bice to install an EV charger at home. The responses to my emails were timely and answered all my questions. Josh - who attended to install the charger was friendly and professional, and took into account my preferences. I am happy with the outcome and would recommend them.

Jee Ken Mahopen Verified Google Review

Very responsive service and answered all the questions I had relating to the installation of our EV charger. Thanks Josh, Brittany and team.

Vaughn Eaton Verified Google Review

Great work. Arrived on time. Communication was great. Professional install of car charger. Cleaned up the work site. Can’t ask for more.

Bob Morrow Verified Google Review

Electrican was punctual, listened to my requests tidy install of EV charger, relabelled all switches etc and went through charger use with me and answered all my questions. Great service will be happy to book Bice Electrical again for future electrical work.

Ian Crew Verified Google Review

Our EV charger installation features and applications

Wall-mounted or pedestal units

Load management systems

Single or three-phase setup

Integration with solar or home automation

Office, apartment & shared parking solutions

Multiple
charger installations

Load balancing
& energy management

Compliant with council and building codes

Our successful EV charger project gallery

Costs to Install an EV Charger in Adelaide

Most Adelaide homes land between $1,600 and $2,800 for a 7.4kW charger installed on a dedicated circuit, though an older switchboard, a long cable run or a three-phase unit will change that. Every quote we give is a fixed price, itemised before any work starts. For the full breakdown, including running costs and the current rebate position, read our EV charger cost guide.

Does an EV Charger Need SA Power Networks Approval?

Yes, and almost every wall charger crosses the line. SA Power Networks requires approval for any EV charger rated above 20A single phase, or above 25A per phase on three phase. That captures the 7.4kW unit most Adelaide homes choose and the 22kW three phase units used on commercial sites. Bice Electrical lodges the application through the SA Power Networks portal before we start, and closes it out once the install is tested and certified.

You never need to contact SA Power Networks yourself. We handle the application, the technical compliance details and the close out as part of the job.

Approval is not required if you only ever charge from a standard 10A or 15A power point. That is the portable lead supplied with the car, and it is not built for charging a daily driver overnight.

We Provide Residential and Commercial EV Charger Installation Across Adelaide

Charge smarter and safer with a properly installed EV charger. We fit single-phase and three-phase units, assess load capacity, install dedicated circuits, and configure load-balancing to protect your supply. For apartment and commercial sites we integrate metering, signage, and cable management, and coordinate with switchboard upgrades where needed. We can pair driveway lighting with outdoor LEDs and add CCTV for visibility and security at the charge point.

Why Our Community Trusts Bice Electrical

At Bice Electrical, we specialise in delivering a complete range of electrical services for homes and businesses across Adelaide. From switchboard upgrades, rewiring, and lighting installations, data cabling, and security systems, we bring precision and safety to every job.

Whether you’re fitting out a new office, upgrading your home’s power supply, or installing CCTV, our experienced electricians work with you to bring your project to life with exceptional workmanship and attention to detail. For the best electrician adelaide has to offer, speak to the team at Bice Electrical!

See Our Full Range Of Electrical Services

Frequently Asked Questions About Our EV Charger Installation

Do I need a dedicated circuit for an EV charger?

Yes. We install a dedicated circuit sized to the charger and your supply. If your board is full or outdated, we’ll recommend a switchboard upgrade to meet demand.

Can I install a three-phase charger at home?

If your property has three-phase supply or can be upgraded, yes. We’ll assess capacity and coordinate with other loads like electric ovens and fans to balance usage.

Will my existing wiring handle an EV charger?

We test your installation and cable runs. Where wiring is undersized, we provide quotes for targeted rewiring to ensure safe operation.

How long does installation take?

Most home installs take a few hours. Additional time may be required for long cable runs, trenching, or board upgrades.

Can you install a charger in an apartment or shared car park?

Yes. We work with body corporates on load studies, metering, and access controls, and can include strata electrical services documentation for approvals.

Do you set up smart charging and Wi-Fi?

Yes. We configure apps and can hard-wire connectivity with data cabling if Wi-Fi is weak in the garage.

Can I add lighting or cameras at the charger location?

We can add motion lighting via our lighting installation service and integrate CCTV for security.

What size charger should I choose?

Most homes use 7 kW (single-phase); three-phase sites can support 11–22 kW depending on supply. We’ll align recommendations with your switchboard capacity and testing.

Will charging increase my power bill a lot?

Charging adds consumption, but off-peak scheduling and solar integration help manage costs. We can also review load balancing to prevent nuisance trips.

Do you install multiple chargers for businesses?

Yes. We design multi-bay solutions with load management, signage, and cable protection, and coordinate with office & shop fit-outs for a neat result.

Can any electrician install an EV charger?

An EV charger must be installed by a licensed electrician, and in South Australia the work has to be certified with an electrical Certificate of Compliance lodged with the Office of the Technical Regulator. Bice Electrical holds electrical contractor licence PGE 259431 and is a certified Evnex installer partner. Using an accredited installer is also what keeps the manufacturer’s warranty intact on most charger brands.

Does my EV charger need SA Power Networks approval?

Yes, if it is rated above 20A single phase or above 25A per phase on three phase. That covers the 7.4kW and 22kW chargers most Adelaide homes and businesses install. We lodge the application through the SA Power Networks portal before installation and close it out afterwards, so there is nothing for you to submit. Charging from a standard 10A or 15A power point needs no approval.

How do I know if I have single or three phase power?

Open your meter box and look at the main switch. One main switch or a single service fuse means single phase, which suits a 7.4kW charger and covers most Adelaide homes. Three separate fuses, or a main switch three poles wide, means three phase, which opens up 11kW and 22kW units. Send us a photo of your meter box and we will confirm it for you.

Can my car actually use a 22kW charger?

Usually not. The limit is the car’s onboard AC charger, not the wall unit. Most electric vehicles sold in Australia, including the Tesla Model Y and BYD Atto 3, accept between 7kW and 11kW on AC, so a 22kW charger adds no charging speed. We check your model’s AC limit before quoting rather than sell you capacity the car cannot use.

Can my car actually use a 22kW charger?

Where can the charger be installed?

Most chargers go in the garage or carport, on the wall closest to the switchboard, which keeps the cable run short and the price down. Outdoor installations are fine because EV chargers are weather rated. If your car parks well away from the switchboard we will price the longer run, or a pedestal mount, at the site inspection.

What if my switchboard is full or has old ceramic fuses?

We will tell you at the site inspection and quote the upgrade separately, so you see the cost before you commit. An older or full board generally needs upgrading before it can take a dedicated EV circuit safely. Where the scope allows, we complete the switchboard upgrade and the charger installation in the same visit.

Can I have a charger installed if I rent?

Yes, with the property owner’s written permission. We can provide a scope of works and the compliance documentation for your landlord or agent to approve before we book the job in.

Get in Touch With Us

Keen to learn more about getting an electric vehicle charger installed at your property? Our experienced team is here to guide you and deliver outstanding results tailored to your needs.

Services Required

What work do you need done?

Add photos or plans (optional, up to 3 files, 10 MB each).